Last Updated: November 1, 2026 | The metal anchor is the CBSL daily gold rate. Charge structures vary by shop — this guide explains the shapes of charges, not what they must be.
A jewellery quote has two halves
Every quote a Sri Lankan jeweller writes can be split:
Asking price = Metal value + The charges
Metal value = Net gold weight × karat fraction × daily gold rateThe metal part is market-driven and verifiable. The charges part is shop policy — negotiable, comparable, and where the real differences between shops live.
The four charges, one by one
1. Wastage (%)
Gold is lost when melting, cutting and polishing. Shops recover it by adding a percentage of weight — "wastage 5%" means you pay for 5% more gold than the finished piece contains. Typical range in Sri Lanka is roughly 1–8% for ordinary pieces; intricate handwork can be higher.
2. Labour / making charge
The worker's fee, quoted one of three ways:
- % of metal value — scales with the gold price
- Rs. per gram — scales with size, not price
- Flat Rs. amount — fixed per piece
Ask which basis — a "10% making" quote and a "Rs. 2,500/g making" quote are not comparable at a glance.
3. Taxes
Any tax component appears either embedded in the price or as a separate line. Ask for it itemised — it is the one charge the shop does not keep.
4. Shop margin
The shop's profit, usually a % on the metal value or on the subtotal. This is the most negotiable line on the bill.
The buy-back question — what would you get back?
Most shops repurchase their own pieces at metal value minus a deduction — commonly a few percent — and charge nothing for the making, wastage and margin you originally paid. That is the "resale spread":
Resale value ≈ metal value at TODAY's rate × (1 − buy-back deduction)Example shape (illustrative, not a quote): buy at Rs. 300,000 with Rs. 240,000 of metal and Rs. 60,000 of charges → same-day buy-back at 3% deduction ≈ Rs. 232,800. The spread is the price of craftsmanship, not a scam — but you should know its size before you pay.
Comparing two shops fairly
- Get each shop's quoted rate per pawn (24K) — their metal anchor.
- Ask for wastage %, making basis, margin % separately.
- Ask the buy-back deduction if you ever sold it back.
- Run both quotes through → Jewellery Price Check — it decomposes the ticket, shows the premium over metal, and builds a bargaining target.
- If you need the pawn weight conversion first: → Gold Calculator; for the daily anchor: → Gold Price Today.
Further reading: Inside a Jewellery Quote: the Rupees That Aren't Gold — the short anatomy of a bill.
Frequently asked questions
Is high wastage always a rip-off?
Not always — complex handmade designs genuinely lose more gold in fabrication. What matters is whether the % is disclosed and comparable.
Should I negotiate the metal rate or the charges?
The charges. The metal rate tracks the market; wastage, making and margin are where shops have room.
Does buy-back apply at any shop or only the seller?
Usually best at the original shop — third parties may test, melt and deduct more. Keep the bill and tag.
Are stones part of the metal weight?
They should not be — net gold weight excludes stones and settings. Check that the billed weight is net gold, not gross.
Sources: metal anchor — CBSL Daily Gold Prices. Charge ranges are descriptive of common Sri Lankan shop practice, not regulated figures — always ask your shop to itemise the actual quote.